Church Acoustics & Sound Systems

Educating churches how to make the Gospel message clear for everyone in Houses of Worship

  • Supported by

     

    Ph # 519-582-4443
    email: jdb@jdbsound.com


    Expert help for your church is just one click away.

  • Archives

  • For additional contact information scan the QR code below

    link to jdbsound.com

Posts Tagged ‘speech’

Does Your Church Need help with Sound?

Posted by jdbsound on August 1, 2019

Here is a collection of 445 photos of 46 churches that completed most or all of their sound system and acoustical plan.  My job is to design a solution that will solve all or almost all sound problems in one step.  For most churches, this means getting the most accomplished in one step as most churches can’t afford to keep chasing sound problems without truthful help.  The road back to great sound in the church is in the Bible, and that is what these churches did. 

All of the installations of the acoustical systems and the sound systems were completed by church members or local contractors when those churches were able to afford professional installers.  The final appearances are what those churches selected.  I work closely with all churches for alternative aesthetics regardless of any budget limitations.  When a church has to choose between aesthetics vs. performance of the 400 plus churches that have just simple painted cardboard tubes on the walls, those churches spoke with what they installed. 

These churches demonstrated that they care more about hearing the Gospel than having a sanctuary that looks good.  There is a high spiritual cost for poor acoustics and sound system designs.  Poor sound does get in the way of people hearing the Word, and for some, it can deny people from understanding the Gospel message of salvation, and that is a cost no church can afford.

For professional, no compromise help, we can provide the highest level of expert assistance that will fulfill the Great Commission as Jesus taught. Having the skills of the world helps but God’s plan for churches demands His way of doing Church Sound. Without that knowledge, the worlds way of doing church sound always comes up short in meeting the standard that God demands of us.

Click the photo above or the link below to see what other churches have done to have great sound for speech, congregational singing and total worship in general.

https://www.flickr.com/photos/jdbsound/collections/72157627021000982/

Posted in Church Acoustics, Church Sound Systems, Rants | Tagged: , , , , , , , , , , , , , | Leave a Comment »

The Scientific Foreknowledge the Bible Teaches about Church Sound?

Posted by jdbsound on July 26, 2019

Here is a fresh look at Solomon’s Temple and how it relates to Modern Churches today. Here is link to a 13 page article about church acoustics from the Bible’s point of view.
The Scientific Foreknowledge the Bible Teaches about Sound and Acoustics?

Introduction

The quality of church worship is critical to the health of a church.  The better the excellence of worship is, the stronger the church will be.  Quality of worship is not about packing the church full of people for the sake of filling a worship space so much that it becomes necessary to keep building bigger buildings.  We worship God, not buildings or pastors or knowledge.  It is the Gospel, the Bible that leads us to God.  It is God’s words that keep us in a relationship with Him.  The strength of a church is not measured in numbers in the seats or money.  Jesus taught us to feed the hungry, clothe the poor, and shelter the homeless.  The Bible teaches over and over again that we are to live by example (Psalms 1:1-6), to be a light in the world (Matt 5:16), when they see that we are different (James 2:14-26), it will be that difference that will attract people to God.

The strength of a church is measured by how people support each other, and by how much a congregation supports each other as a family first, as brothers and sisters, and then the local community.  Is the church feeding the hungry, clothing the poor, and sheltering the homeless?  The modern version of Jesus teaching for us in countries with a democracy and wealth should look like this.  Is the church cutting lawns, clearing driveways, cleaning people’s homes, fixing up members and non-members homes?  How often are church members spending time with the widows, the singles who have never had a partner, or the elderly?  Are these not the things included in what Jesus told us to do?  Are not these the same teachings in the Old Testament?  This is just a small sample of how Christianity should look like to the secular world.

___________________________________________________________________
After reading the full article, please comment on it. We want to get this right as the church community needs this knowledge. If you have any questions, want to learn more or see a presentation about Solomon’s Temple and the Modern Church, contact me here – jdb@jdbsound.com

You church may be one of those that has great sound for all parts of the worship service. If it is, you should let everyone know as it will help to bring more people in. You should let us know so we can tell others. If you find this article helpful, please pass it on. Pass it on to your pastor, your friends and family. Give them the chance to learn what God can do for them today!

Thank you.

All modern churches can benefit from Biblical Acoustics
All older churches can benefit from Biblical Acoustics

Posted in Church Acoustics, Educational Must Read Articles | Tagged: , , , , , , , , , , , , , , , , , , , , | Leave a Comment »

Church Sound and the Gospel

Posted by jdbsound on January 28, 2019

The goal of any worship space and the church sound system is not about loudness, gain before feedback, intelligibility, special sound effects for the organ or choir, having the most talented performers in the worship team, how many wireless mics, number of channels the mixer has or the name brand of equipment you have. The goal of a church worship space and the sound system is to be a safe place where the Gospel can be presented clearly and with little to no blemishes. Where every person within the worship space can hear and understand the Gospel as clearly as when having a conversation with someone only 4 feet away and sharing the Gospel. Anything less than that goal means that the spoken word can be corrupted in the journey between the minister’s mouth and ears of all those who are listening. The Gospel needs to be broadcasted and understood as clearly as reading God’s written words.

If your church has hot spots, dead spots, good sound in these seats and poor sound in those seats, then the Gospel is not being presented equally to everyone. If your sound system has technical problems during worship often, then it is a distraction, and it can make the difference of understanding something important.

The chart below shows tangible results when your worship and sound system are tested. There should be three tests.

The first is with a test speaker. It is a point source speaker that is small enough to mimic a person’s voice.

The next test is feeding a signal directly into the sound system and test those results. This test is just about the playback quality of your sound system.

The third test is to use the test speaker 30 inches from an open microphone such as a pulpit or any microphone on a stand and test the combined results of the worship space’s acoustics direct interaction of the sound system and open mics. You can also do a second version of this test and place the test speaker 4 inches from a microphone where the microphone is 45 degrees off axis.

If all three tests are not in the Yellow section, the results will let you know if it is your sound system, the acoustics or all of the above.  This is also a better indication predicting if upgrading your sound system will improve the results you are looking for. This is also a strong indicator that your worship space needs some kind of an acoustical management system

sti alcons chart conversion

You can get your church tested. It doesn’t cost much, and the results can save a life or many lives, depending on your point of view. As an independent consulting company, we offer church testing and results with no obligation to use our services in the future.

Share your comments.  Was this article helpful?

Posted in Church Acoustics, Church Sound Systems | Tagged: , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a Comment »

Dead Spots – Sound System or Acoustics?

Posted by jdbsound on April 9, 2018

An unwelcomed guest in any church is Mr. Deadspots. Unfortunately, deadspots in churches are more common than you think. There are two main types of deadspots. Some are frequency related/comb filtering interference and others are dips in sound levels greater that 6dB created by the room.

It is common to see frequency related deadspots in Left/Right sound system regardless if they are Line Arrays or point and shoot speakers. These deadspots are created by interference patterns in a mono speech system as a persons voice is always mono.  These deadspots are where you shift from one foot to another and notice a sound change. In these cases it becomes a problem when on one foot you hear the highs but not the lows. When you shift your position onto the other foot, you hear the lows and the highs disappear. People with hearing aids or early stages of hearing lose notice this the most. People with good hearing notice the change too but learn quickly to put up with it. Some young people think of it as a passive noise filter. If the music is too bright, stand to one side of your seating position. If the music is too boomy, shift to the other side of your seating position. Really! Isn’t that like buying a headset and controlling the sound changes with what angle you tilt your head. It might sound like a great idea until you find yourself with a lot of neck pain. No thank you.

Sound level dips are usually acoustically related. These are created with standing waves, bass building up, hollow walls, room corners, and parallel surfaces that include walls, ceilings and floors and concaved surfaces. In all of these cases, often mid and bass energy build up and the highs are absorbed with carpets, padded pews and people. By the nature of churches and how they are used, carpeted floors and padded seating often represents how the church sounds when it is 50% full. That means that if your attendance is often over 50%, the effects of padded seating and carpeted floors has little to no impact. If church attendance is often over 70% a carpeted floor makes the room more intimate during times of prayer and solemn reverence. In the end, carpets and padded seating is a good thing.

However, because of people in the room, once that room attendance is above 50% the people absorb enough highs that extra mids and bass energy is left behind as is being amplified between parallel surfaces. This excess energy automatically masks the highs. When the highs are masked, speech and music intelligibility drops. The kicker is, if you go around the room with a sound level meter, often the sound levels don’t drop much, even when you stand in a spot where the highs (when you measure just the highs) drop off over 6dB. That is because the excess bass energy is so strong that it fools the sound meter as the meter is reading an average sound level. When you take sound level readings by frequency, then you notice the high number of deadspots in the room. Get a tone generator in a cell phone or computer app and play a constant tone at 55dB at 500 Hertz, 1000 Hertz and 3000 Hertz and then start walking around. At 500 Hertz you shouldn’t notice much of change until you get close to walls. At 1000 Hertz you will notice more changes. At 3000 Hertz, if you are hearing a lot of changes, imagine what 25% of your church audience is experiencing.

Here is a church that had both acoustical and sound system created deadspots, with a central cluster. By nature of a central cluster, in a good room, it gives the best coverage and performance for speech. There is no better way to design a church sound system unless your ceiling is less than 14 ft. high. Choice of speakers, coverage patterns and speaker placement impacts sound too but these are mainly tone qualities and gain before feedback related. It may have up to a 2 or 3% impact on overall intelligibility as well.

corner view pano Ebeneezer Church_s

In this church example, it already has a fairly good quality speaker system in the ideal location for the room. It is designed as a central cluster and by nature, in this setup, it should perform well. However, it didn’t matter if you used the main speaker system or used portable speakers on stands, with any sound amplified you could find deadspots all over the room. On top of that, if you raised your voice in the room, once you were more than 18 feet from someone, understand what was being said was difficult to impossible depending on dictions of the person talking and how good is one’s hearing. When the proper acoustical fix was applied, all of those problems went away and the church didn’t need to upgrade the speaker system.

The church decided to leave the sound system alone as the gain before feedback improved and all of the deadspots disappeared. Since this is a traditional church that has no intentions to do anything contemporary, the acoustical fix was designed to not change the overall reverb time. Before and after reverb time remained about the same. 1.7 seconds.  It was the frequency response of the room that saw a major change. As the graphs shows below, where the mixer for the worship space was located, it was also one of many spots where weird measurements were recorded before. We found dozens of spots where the room measurements went squirrely. This is typical of the results of measuring a Left/Right speaker system, not a cluster system. These weird results were a result of room acoustics and not the sound system.  We used our own test speaker for all room testing.

Sound Booth Before and After

After checking our test equipment for errors, it was then realized that by just moving the mic over a few inches, you would get a very different result. In some places, the sound was perfectly fine but move over a few inches and it was not. Our ears are about 8 inches apart. In one row of seating, the largest distance we could move the test mic between a good spot and bad spot was 14 inches. Pew seating is 18 inches.  Every seating position had both good and bad sound. What we were measuring was sound masking in the mids and lows.  The energy was so strong that it masked the highs.  Not only that but the highs were most likely also being canceled from nearby wall reflection between 1800 to 5000 Hertz.  It gave the impression that there was something wrong with the sound system.

In this church, people marked their seating positions by placing personal pillows in spots where the sound was better. Sure enough, testing these spots showed better sound before the acoustical treatment was applied. After the acoustical system was installed, the sound was the same no matter where you sat including the sound booth.

Deadspots in churches are more often a result of worship space design and not a result of sound system design (unless you have the wrong speaker system design for your room). When a church replaces a well-designed sound within 10 years, and have little to no overall improvement after an upgrade, that should be a BIG RED FLAG that you most likely have a serious acoustical problem and no amount of money spent on the sound system can make those problems go away. Besides, these days, acoustical fixes cost less than sound system fixes. As a caveat, our experience has been this. Churches that have fixed their acoustics and then wanted on to expand their music programs, they were able to upscale their sound system with a much higher budget as they upgraded, it actually lead to better performance rather than an exchange of one set of problems for another.

Bottom line is, get your church properly tested. Have someone who knows how to properly diagnose the data, and then design your church a proper acoustical management system. Install the acoustical system and watch the congregation respond and grow. Don’t be surprised if other churches want to use your church for musical and recording events. Your property value may go up too.

Note – The acoustical system is made up of 8 and 12 inch half round plaster covered foam diffusers on 3 walls.  The side walls use a gradient pattern to maximize room performance. On the back wall there are 24 units of 7 ft. x 2 ft. x 18 inch plaster covered foam diffusers that are hollow which allows for additional passive room equalizing in the near future. Project completed by church members.

By Joseph De Buglio
JdB Sound Acoustics

Posted in Church Acoustics | Tagged: , , , , , , , , , , , , , , , , , , , , | Comments Off on Dead Spots – Sound System or Acoustics?

Message for Architects and New Church Buildings

Posted by jdbsound on February 19, 2015

It has been brought to my attention by a number of church members about who gets to decide the final aesthetics of worship space interiors.  Church members of some newly built churches which are less than one year old were pointing out to me that in the end, we acoustical designers get to ultimately decide the final aesthetics of a church – not the architect, no matter how much effort an Architect puts into the aesthetics of a worship space.   If this sounds familiar then check out my post in 2012 where I made a similar post.  This discussion comes up often.

It seems that when acoustics are included in the design stage of a worship space, the Architect has the last say on the rooms aesthetics – assuming the acoustical plans are not compromised later on.  When acoustics are left out of the design phase of planning a new church, it is people like me that get the final say in the room aesthetics. Whether it is while the building is being built or anytime later – even 200 years later, it is people such as myself that often make the final aesthetic changes that will last the life time of a church building. 

The good news is, is that when we are included in the design phase of a new church, often our acoustical designs blend into the architecture and it is often not seen or at least not seen as an acoustical add-on.  In fact, often our acoustical designs come off as the Architects design of the worship space and at times to the untrained person it looks like we had done nothing.   Where friction often comes up, is when after the design of the church has been completed and the church board has given the green light, that is when someone raises the issue of acoustics.  Often there are major acoustical issues as what is taught in Architectural schools is about concert hall acoustics, school auditorium acoustics and lecture room acoustics. 

Church acoustics is totally different and I don’t know of any place were “church acoustics” is taught.  This is often why bringing someone like me after a finished design is presented to a church where butting heads starts.  When there are glaring mistakes being made and we point them out, it often means major design changes which often cost money to change at this phase.  Once past the design phase, churches are rarely ready to pay for design changes that often means delaying the project which increases costs higher.  As a result acoustics is usually left until the church is finished.  But wait!  A church is not finished until the acoustics are done.

As stated before, it is people like me who get to decide the aesthetics of a church when acoustical design is left out.  This goes for new churches, storefront churches, churches moving into commercial buildings or are using commercial building designs and churches doing renovations.  If you are an architect, include us at the beginning of the design process and the aesthetics will be all about you.  Leave us out of the design process and no matter how beautiful a space you thought you designed, it will be people like me who get to decide it’s final finish and sometimes, what we do is not very flattering but when it sounds great, the less than pleasing acoustical treatment starts to look good. 

Joseph De Buglio  

PS: Don’t call us if you want someone to just rubber stamp your worship space designs.   

  

Posted in Church Acoustics | Tagged: , , , , , , , , , , , , , | Comments Off on Message for Architects and New Church Buildings

 
%d bloggers like this: