Church Acoustics & Sound Systems

Educating churches how to make the Gospel message clear for everyone in Houses of Worship

  • Supported by

     

    Ph # 519-582-4443
    email: jdb@jdbsound.com


    Expert help for your church is just one click away.

  • Archives

  • For additional contact information scan the QR code below

    link to jdbsound.com

Posts Tagged ‘Third Temple’

Was Solomon’s Temple for real? If it was, how would it sound?

Posted by jdbsound on May 7, 2019


Was Solomon’s Temple a fairy tale? I don’t think so. I think Solomon’s Temple was as real as touching your own skin. Why? Solomon’s Temple was designed over 3,000 years ago. When you study the sound quality of the two rooms, it describes spaces that were purpose built for specific functions. The room that reflects modern day acoustics is the Holy Place or Sanctuary as we like to call it today. How can the design of a room from 3000 years ago be so good if it was never built or a fairy tale or myth? Do you think that King David or Solomon knew anything about acoustics back then? Did God tell King David and Solomon’s how to design rooms where hearing would be easy or difficult? Could the acoustics of the Holy Room reflect todays demanding needs of sound for worship? Yes. Absolutely!

The only difference between what a traditional worship space and a contemporary worship space would be the need for is adding carpeted floors and padded seating for worship team lead services. Churches with similar dimensions and shape as Solomon’s Temple have a way better worship experience over churches that have other room shapes. That is not to say you can’t have a good worship experience in other room shapes, but if you can remember your best worship experience in other rooms with good acoustical sound management, it is way better when the room is a rectangle. This only happens when the room is twice as long as it is wide, and with a very high ceiling that is 75% of the rooms length. With those dimensions and with the same type of acoustical treatment system as used in Solomon’s temple, regardless of your worship style, the only experience better than that would be in Heaven. And yes, the carvings of Cherub, Palm Trees and open flowers was actually an acoustical system designed by God. The updated version of it work great in modern churches today.

The modified version use half round shapes like the Palm tree. An affordable way to fix any church is with cardboard tubes. Such tubes using a water based glue meets fire codes in almost any place around the world, and does as good of a job as the carvings in Solomon’s Temple. For churches that have little to no money to spare, this is the cheapest way to breath life into all of those existing churches out there regardless of their room shapes. This is the only acoustical system that improves congregational singing (even is dead rooms), and doubles the loudness of the sound systems performance without distortion and without buying more equipment. (assuming that the equipment you already have is up to the task of performing at these levels in the first place.)

Now when I say doubles loudness of the sound system, it means that if you total the components of your speaker system, amplifiers and processors, and multiply the equipment 10 times, that is doubling the loudness. Remember that doubling the equipment or doubling the power only gives you a 3dB increase, but it take 10 times the power to double the loudness without distortion which is equal to 10dB. In most churches, an acoustical fix such as this has a one time costs of about $5.00 per seat. A typical speaker system for a church cost around $30.00 per seat and up. To get the same performance through sound equipment as a room treated with Cardboard Tubes, the speaker system goes up to $300.00 per seat or ten times the cost. If you do a reality check, you would actually have to spend more because you are still fighting the room to keep the sound distortion free. Even at $500.00 per seat, you may not be able to get double the loudness without distortion. To apply this kind of acoustical system as in a church as in Solomon’s temple, it lowers the cost of a sound system while increasing it’s performance. There is no other acoustical system that can do that.

Now Solomon’s Temple was built over 3000 years ago. How did they know how to do acoustical treatment that works in churches today? How is it that something designed 3000 years ago is so sound system friendly? The reality is, God inspired it’s design. Many Christians believe that the Bible is sufficient in all things and that should including church design and acoustics. Shouldn’t we be following what the Bible says and teaches, even in worship space design? (Ecclesiastes 1:9)  The thing that hath been, it is that which shall be; and that which is done is that which shall be done: and there is no new thing under the sun. If there is nothing new under the sun, then why do churches keep trying to design something original or different when there is nothing better out there? Worse yet, why don’t churches know that for preaching the Gospel there is no better room than a room with the dimension ratio’s as in Solomon’s Temple? Furthermore, why are so many churches determine to solve acoustical problems with electronics when they don’t have to?

Solomon’s temple was small. It could only seat around 150 people if used as a church today. Apparently, you can scale the room up to any size and have the same performance results. Why hasn’t the church community figured this out? (Why aren’t Synagogues built this way either?) From my own experience, if you use these dimensions, such a room will sound amazing as long is the walls have the right shapes added on them. At the same time this room will awful if you don’t include the same type of acoustical system as used in Solomon’s Temple. Please notice that I use the term “System”, and not “Treatment.” When you call it a system it is about a planned acoustical space or a system that treats the whole room. When you call it a treatment, it is as if the acoustical products are used as an after-thought. Such acoustical products are used only do spot treatments and they provide minor room fixes, and cost so much more expensive.

The most important roll of a House of Worship is to preach the Gospel. No other room shape, dimensions and wall finishing’s does it better. Why would any church design the most important room with a lesser goal? The foyer, fellowship halls, classrooms, office and the shell of the building can be any shape you want but the worship space should be designed for the sole purposes of teaching the Gospel and for a full worship experience. All other room shapes and treatments, regardless of the sound system design and equipment fall short in meeting the standard found in Solomon’s temple.

If you believe as I do that the Bible is sufficient, then it should be sufficient in the design on your next church sanctuary. Oh, didn’t anyone tell you? A room built to Solomon’s dimensions costs less to build, heat and cool and maintain. Solomon’s Temple is a fine example of “Nothing new under the sun.”

For the 400 plus churches that already have such an acoustical system, what further proof do you need that Solomon’s temple was real? If you want to take it a step further, since science cannot predict how this acoustical system works, a system that you have to apply in faith, does that constitute a miracle?

Posted in Church Acoustics, Educational Must Read Articles | Tagged: , , , , , , , , , , , , , | Leave a Comment »

 
%d bloggers like this: