Church Acoustics

Solving Sound System problems only Acoustics can fix.

  • Sponsored by

    Ph # 519-582-4443
    email: jdb@jdbsound.com


    Successfully turning the most complicated, hostile and hardest acoustical spaces into the best sounding worship spaces in the world one church at a time.

  • Archives

  • Contact information of JdB Sound Acoustics qr code

    link to jdbsound.com

Posts Tagged ‘house of worship’

Singing at 105dBa!

Posted by jdbsound on April 10, 2015

Congregations can sing at 105dBa.  At least that is what they do in churches that I have fixed and that does happen in other churches too, that perform well.  When they do sing that loud, what do you do?  Or, what do you do when the congregation is starting to drown out the sound system?

  1. Keep pushing the sound system to keep up with them.
  2. Keep the sound system at 90dB and let the congregations voices dominate.
  3. Lower the sound system FOH levels so that the congregation can enjoy what they are doing.
  4. Push the sound system to drown out the congregation as always regardless if the sound system is distorting or not.

Please tell us what you do when mixing.

Joseph De Buglio

Posted in Church Acoustics, Church Sound Systems | Tagged: , , , , , , , , , , , , , , | Comments Off on Singing at 105dBa!

Question! What would you do to fix the Acoustics of this Church?

Posted by jdbsound on April 1, 2015

You have a church that seats 750 people.  It is a simple rectangle room with 30 ft walls, 40 ft to the peak, 80 ft wide and 140 ft long.  The reverb is 2.2 seconds at 300 hertz and 1.3 seconds at 2000 hertz.  An Energy Time Curve test show reflections over 30dB at one second on the ETC in the 300 hertz range.  The floors are carpeted and the pews are padded seats and backs.  All of the walls and ceiling are insulated drywall on 12 inch centers.  Basically there is about 30dB of excess energy at 300 hertz.  300 Hertz has a wave length of 3.75 ft. The church has already tried 4 different sound systems over 10 years and all of them were designed and installed by companies that are supposed to be the best in the business and they all started off saying that the room needs to be fixed – but church board members vetoed anything that would change the aesthetics of the room – but it was OK to hang 2 ugly line arrays which lasted only 6 months.

The church is now asking for another sound system but this time all of the professional audio companies turned down the project and said to the church don’t call us back until you fix the room.  Now the church board has relented and they are allowing acoustical panels to be mounted on the walls. What acoustical method or system would you use to fix the problem?  What will reduce energy 30dB in this space?

For all the walls in the church, between windows, doors and bulkheads, there is only 35% of the total wall space available to mount acoustical panels on. Major issues are – Stage noise, floor monitors as loud as main speaker system in the first 10 rows.  Only 20% of the congregation is ever singing. Speech intelligibility is below 85% in full range – if you roll off the sound system at 200 hertz speech intelligibility improves to 88%.  Gain before feedback is very poor after 3 or more microphones are turned on at the same time. Subs never really sound right.  Pastor hears echoes all the time off the side walls when preaching. Drummer can never hear himself or the other worship team members – even with the headset monitors. The are currently using electronic drums but they have tried drum shields and booths without much satisfaction.

The church used to have a 40 voice choir but they never sounded very good and now with over $150,000 invested in a praise and worship team with all the latest state of the art technology and higher trained sound engineers, they sound no better than what the choir did years ago – but they are better at entertaining people!

(note: this is a fictional church but this is based on actual events that have happened recently in three southern Ontario Churches.)

Joseph De Buglio

Posted in Church Acoustics, Church Sound Systems | Tagged: , , , , , , , , , , , , , , , , , , , , | Comments Off on Question! What would you do to fix the Acoustics of this Church?